- Overview
- Product Description
- Product Feature
- More Product Parameters
- Certifications
- Customer Reviews
- Company Profile
- FAQ
Basic Info.
Packaging & Delivery
Product Description
Our Team Will Make The Best Product Solution For Your Project.Please Contact Us
Solar PV for dry type transformer has obtained multiple certifications and its product quality is favored by customers.
If your order quantity is large, we can customize the certificate for you need certificate.
Transformers Cores Matericals,we can customized two kinds of : Amorphous Alloy Cores or Silicon Steel Cores.
Power Transformers Coil Matericals,we also can customized two kinds of : Copper Coil or Aluminum Coil.
and There are more technologies to meet your needs.
I hope recive you massage.
Why i can say this information about custom Power transformer,Distribution transformer,Subtation transformer,Special transformer?
Because our factoy have more than 300 engineering and technical personnel,more than 1200 employees,covering an area of 240000 square meters.
Of course, our prices are reasonable and cheap, guaranteed to fit your purchasing plan.Dont't worry you plan.
We very much welcome all future partners to visit our factory and office.
Believe in the quality of our products.
Our products are mainly supplied to large national enterprises in China: State Grid, China Southern Power Grid, China Railway, various types of hydropower stations, wind power stations, photovoltaic power stations, etc. Customers can be assured of product quality.
We also cooperate with large companies abroad. for example :
Our pad mounted transformer is designde and tested in accordance with industry standards including CSA,ANSI C.57,DOE,and IEEE as applicable.
Pad Transformers are made in power ratings from around 500 to around 10000 kVA and often include built-in fuses and switches.
The Liquid-Filled Loop Feed Pad Mounted Transformer is an oil-filledthree-phase, commercial pad mounted distribution transformer specifically designed for servicing such underground distribution loads as shopping centers, schools, institutions and industrial plants. lt is available in both live front and dead front construction, for loop feed applications. with or without taps. The transformer uses aluminum or copper winding and is optimized to maximize efficiency and footprint. lt has many advantages: such as high voltage, no drifting of neutral point, low loss small volume, cost-effective, safety and environment protection. attractive appearance and etc.
Our Liquid-Filled Loop Feed Pad Mounted Transformer is designed andtested in accordance with industry standards (including CSA, ANSIC.57.DOE, and IEEE) as applicable.
Pad Mounted Distribution Transformers Winding
The low voltage winding adopts the whole section of copper foil, which is wound on the special low-voltage foil winding machine with the F-grade insulation. The foil coil solves the outstanding problems such as low voltage, high current coil winding, high short-circuit stress, unbalanced ampere turns, poor heat dissipation effect, windingspiral angle, unstable manual welding quality and so on. At the same tim-e, the winding ends of our company aresealed with resin, cured and formed, moisture-proof and antifouling. The lead copper bar is automatically welded byargon arc welding.
Pad Mounted Electrical Transformer Accessories
All the accessories you need to customize our products to your needs.
• Externally clamped universal high-voltage bushing wells for dead- front applications (three for radial feed operation or six for loop feed operation)
• HVconnection:Live front-external clamoed and removable HV bushing with
eyebolt,clamp type connector
• Externally clamped low-voltage bushings with threaded stud for full-load current through 1400 Amps, or externally clamped one-piece NEMA spade bushings for full-load current above 1400 Amps.
• Removable high-voltage /low-voltage neutral link, internally mounted and accessible through tamper-resistant hand hole
• Lifting provisions
• Removable terminal compartment and bottom sill, and removable doors with stainless steel hinges
• Removable hood with stainless steel hinges, and removable sill with stainless steel fasteners
• Three-point door latching system with recessed interlocking pentahead security bolt, and padlock provision.
• Recessed hood latching system with captive pentahead security bolt, floating nut, and interlocking padlock provision.
• Tank ground provisions
• Mild steel high-voltage /low-voltage compart-ment barrier
• Domed top surfaces on tank and terminal compartment to prevent water retention
• Recessed tank compart-ment bottom
• Oil fill/ oil level plug
• Oil drain plug for 500 KVA and below.
• Automatic pressure relief device mounted in terminal compartment.
• Oil drain valve with sampling device on 750 kVA and above
• Electrical grade mineral oil insulation fluid with oxidation inhibitor
• Laser engraved anodized aluminum nameplate
• Five-legged core/coil assembly.
• Self-acluating pressure relief valve.
Transformer Test
Transformer ratio and connection
Measurement of load losses and short circuit impedance.
Measurement of no-load losses.
Separate source withstand voltage test
Induced over-voltage test
Temperature rise test
Lighting impulse withstand voltage test
Measurement of partial discharge
Other transformers like rectifier transformer are also available on request.
• Loadbreak high-voltage bushing inserts or externally clamped integral (one piece) high-voltage bushings for dead-front applications.
• Externally-clamped porcelain high-voltage bushings with eyebolt connectors for live-front applications.
• Low-voltage connectors, including various screw-on or slip-on types.
• Lightning arrester mounting provisions.
• Externally operable non-loadbreak high-voltage tap switch with one of the following tap ranges: four 2.5%taps above normal; or four 2.5% taps below normal; or two 2.5% taps above and two 2.5%taps below normal; or taps at13800/13200/12870/ 12540 for transformers with a nominal high-voltage rating of 14400 (may not be available in combination with dual high-voltage switch).
• Externally operable dual high-voltage switch (may not be available in combination with high-voltage tap switch).
• Externally operable two-position or four-position high-voltage loadbreak switch.
• Secondary termination:Externally clamped bushings with NEMA 4-hole, 6-hole, 8-hole, 10-hole or12-hole spades Spade supports are available. They are provided for 8-hole spades and larger.
• Draw-out full-range current limiting fuses in dry-well canisters; with or without interlocking loadbreak switch.
• Arc Strangle* fused disconnect.
• under-oil, elbow, or panel-mounted types (panel-mounted types are available on compartmental live-front units only).
• Drip shields for use with draw-out expulsion fuse.
• High capacity pressure relief device mounted on tank cover.
• Drain valve with sampling device.
• Total stainless steel or hybrid.(mild steel/stainless steel construction)
• 30" or 34" or 40M deep cabinet.
• CT or PT, including mounting support.
• External Watt-hour meter base with or without meter, or mounting provisions only( Compartmental style, live-front construction only).
Pad Mounted Transformer | ||||
Rated Power (KVA) | High Voltage (KV) | Low Voltage (V) | Loss (W) | |
No-load Loss (W) | On-load Loss (W) | |||
75KVA | 34.5KV/ 19.92KV/ 13.8KV/ 79.57KV/ 13.2KV/ 7.62KV/ 12.47KV/ 7.2KV or others | 240V 480V 277V 600v 347V | 180 | 1250 |
112.5KVA | 200 | 1500 | ||
150KVA | 280 | 2200 | ||
225KVA | 400 | 3050 | ||
300KVA | 480 | 3650 | ||
500KVA | 680 | 5100 | ||
750KVA | 980 | 7500 | ||
1000KVA | 1150 | 10300 | ||
1200KVA | 1320 | 12120 | ||
1500KVA | 1640 | 14500 | ||
2000KVA | 2160 | 20645 | ||
2500KVA | 2680 | 27786 | ||
3000KVA | 3300 | 30300 | ||
3750KVA | 4125 | 37875 | ||
Our company has a relatively strong production capacity and efficient marketing team.Products include 110KV,220KV large ultra-high voltage transformers and 35KV below various dry transformers,oil-immersed transformers,amorphous alloy transformers,pre-installed substation and various specifications of box transformer,furnace transformer,rectifier transformer,mining transformer and other special transformers.All products of the company have passed the routine,type and special tests of the National Transformer Quality Supervision and inspection Center and wuhan High Voltage Research Institute of the State Electric Power Corporation.The enterprise has passed IS09001:2015 quality management system certification;Jiangsu province enterprise measurement certification;At the same time,10KV,35KV class power transformers,box substation and the adoption of IEC certification.Product sales cover the national market,but also exported to Australia,New Zealand,India,Madagascar,Vietnam and other countries and regions.
1.Who are we?
We are transformer company, based in Jiangsu, China, start from 2007,sell to Domestic Market(80.00%),Southeast Asia(20.00%). There are all about 1200-1500 people in our company.
Always make a final Inspection before shipping.
110kV-220kV Oil-immersed Power Transformer,Dry-type Transformer,Unpacked H Grade Dry Transformer,Oil-immersed Distribution Transformer, Pad-mounted Transformer,Enameled Wire,Composite Wire,Transposed Wire,Paper Covered Wire,Film Wrapped Wire.
As an enterprise specializing in transformer production for 31 years, we have high quality, fast delivery, guarantee after-sales service and factory price. What's more, we have ISO9001-2008, OHSAS 18001:2007, ISO4001:2004L ,UL ,CE certificates and IEC, ANSI, KEMA, GOST standard.
Accepted Delivery Terms: FOB,CIF,EXW; Accepted Payment Currency:USD,CNY; Accepted Payment Type: T/T,L/C; Language Spoken:English,Chinese.