Basic Info.
Model NO.
WD5880
Mixing Ratio
a:B=5:1
Main Raw Material
Epoxy
Type
Liquid, Two Components Epoxy Resin Glue
Shelf Life
6 Months
Leading Time
3 Working Days
Transport Package
Barrel
Specification
20kg, or customized available
Trademark
SWETE
Origin
China
Production Capacity
10 Ton/Tons Per Day
Product Description
Product Description
WD5880 Insulated Bubble Free Epoxy Resin for Electronic Potting
Epoxy Resin WD5880
Epoxy resin WD5880 is a black epoxy potting resin, can be cured under normal temperature and low temperature, with good flowing property, natural defoaming, it can also be cured at high temperature.
Application
WD5880 can be widely used for electronics potting, power encapsulation, mold filling and the insulation of other electronic components, moisture proof,confidential encapsulation, etc.
Features
1.No bubbles, good flatness, good gloss, high hardness.
2.Cured products with good flame retardant property.
3.Good acid-base resistance.
4.Good moisture, water, oil, dust resistance.
5.Good resistance of humidity and weather aging.
6. Good heat dissipation performance.
How to do
MEASURING
With gloves on, pour equal amounts of resin and hardener into a mixing cup. And then pouring the mixture into another clean mixing cuo to make sure you are mixing it well.
TIP - Mix up a little more than you think you'll need because you want to completely cover your work in one shot and not have to mix more later.
MIXING
Stir really well for at least 3 minutes. Scrape the sides and the bottom to make sure you're being thorough (unmixed material will leave you with sticky spots that just won't cure). Once you put the resin and hardener together, you'll have about 40 minutes of working time before the resin thickens and cures.
POURING
After making sure your piece is level, go ahead and pour AmazingResin over your work. Don't be scared! It'll start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up. You'll notice bubbles will begin to rise to the surface. Many of these will pop on their own, but you can also pop them by torch.
TIP - Wooden panels work best for large pieces rather than canvas because they won't sag under the weight of the resin.
WAIT AmazingResin needs to sit for several hours in a dust-free space while it cures. In about 8 hours it will be tacky but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured. It will be fully cured within 72 hours.CLEAN UP - To reuse your mixing tools, wipe them down with a paper towel before the resin dries.
Comparison
Detailed Images
Apply on circuit board , capacitor, storage battery and kind of electronic product that need to pot ,sealant , waterproof, insulate.
Factory Show
FAQ
1.Do you provide free sample?
Yes, we provide free sample also shipping cost is free. Our free sample is 400g you shoule bear the freight first when you make bulk order to us we will reduce from the total amount.
2.Which shipping way is available and how to track?
By sea to your nearest port By express (DHL,UPS,FEDEX,TNT,EMS)to your doorWhen ur order shipping out . we will provide u a tracking no. then u can know clearly the status of the goods
3:My package has missing products. What do I do?
Please contact our support team and we will confirm your order with the package contents. We apologize for any inconveniences!
4.Which payment way is workable?
Western Union,L/C,Paypel, Trade Assurance on AlibabaT/T (30%deposit, 70% before shipment after presentation of ready cargo).
Storage Conditions
The product should be sealed in its original packaging container and stored in a dry and ventilated place. In an environment of 18-40ºC, the shelf life is 6 months. If the shelf life is exceeded, analysis is required to determine whether it is still valid.
Due to the storage conditions, this product may experience a small amount of precipitation during storage, which is a normal phenomenon. After stirring evenly, it can be used normally.
WD5880 Insulated Bubble Free Epoxy Resin for Electronic Potting
Epoxy Resin WD5880
Epoxy resin WD5880 is a black epoxy potting resin, can be cured under normal temperature and low temperature, with good flowing property, natural defoaming, it can also be cured at high temperature.
Application
WD5880 can be widely used for electronics potting, power encapsulation, mold filling and the insulation of other electronic components, moisture proof,confidential encapsulation, etc.
Features
1.No bubbles, good flatness, good gloss, high hardness.
2.Cured products with good flame retardant property.
3.Good acid-base resistance.
4.Good moisture, water, oil, dust resistance.
5.Good resistance of humidity and weather aging.
6. Good heat dissipation performance.
| Part | WD5880 | WD5880 |
| Color | Transparent | Transparent |
| Specific gravity | 1.65 | 0.96 |
| Viscosity (25ºC) | 2000-4000CPS | 100 MAXCPS |
| Mixing ratio | A: B = 100:20(weight ratio) | A: B = 100:20(weight ratio) |
| Hardening conditions | 25 ºC×8H to 10H or 55ºC×1.5H (2 g) | 25 ºC×8H to 10H or 55ºC×1.5H (2 g) |
| Usable time | 25ºC×40min (100g) | 25ºC×40min (100g) |
How to do
MEASURING
With gloves on, pour equal amounts of resin and hardener into a mixing cup. And then pouring the mixture into another clean mixing cuo to make sure you are mixing it well.
TIP - Mix up a little more than you think you'll need because you want to completely cover your work in one shot and not have to mix more later.
MIXING
Stir really well for at least 3 minutes. Scrape the sides and the bottom to make sure you're being thorough (unmixed material will leave you with sticky spots that just won't cure). Once you put the resin and hardener together, you'll have about 40 minutes of working time before the resin thickens and cures.
POURING
After making sure your piece is level, go ahead and pour AmazingResin over your work. Don't be scared! It'll start to level on its own, and you can spread it around into place. Let the resin run over the edges and then just use a brush to tidy it up. You'll notice bubbles will begin to rise to the surface. Many of these will pop on their own, but you can also pop them by torch.
TIP - Wooden panels work best for large pieces rather than canvas because they won't sag under the weight of the resin.
WAIT AmazingResin needs to sit for several hours in a dust-free space while it cures. In about 8 hours it will be tacky but you will be able to pour a second coat if necessary. In about 12 hours it will be dry to the touch, and within 24 hours it will be 95% cured. It will be fully cured within 72 hours.CLEAN UP - To reuse your mixing tools, wipe them down with a paper towel before the resin dries.
Comparison
Detailed Images
Apply on circuit board , capacitor, storage battery and kind of electronic product that need to pot ,sealant , waterproof, insulate.
Factory Show
FAQ
1.Do you provide free sample?
Yes, we provide free sample also shipping cost is free. Our free sample is 400g you shoule bear the freight first when you make bulk order to us we will reduce from the total amount.
2.Which shipping way is available and how to track?
By sea to your nearest port By express (DHL,UPS,FEDEX,TNT,EMS)to your doorWhen ur order shipping out . we will provide u a tracking no. then u can know clearly the status of the goods
3:My package has missing products. What do I do?
Please contact our support team and we will confirm your order with the package contents. We apologize for any inconveniences!
4.Which payment way is workable?
Western Union,L/C,Paypel, Trade Assurance on AlibabaT/T (30%deposit, 70% before shipment after presentation of ready cargo).
Storage Conditions
The product should be sealed in its original packaging container and stored in a dry and ventilated place. In an environment of 18-40ºC, the shelf life is 6 months. If the shelf life is exceeded, analysis is required to determine whether it is still valid.
Due to the storage conditions, this product may experience a small amount of precipitation during storage, which is a normal phenomenon. After stirring evenly, it can be used normally.
